Products
220V Wall-mounted Active Harmonic Filter
220V Wall-mounted Active Harmonic Filter, competitive factory price, and top-quality performance. Enhance your system with this intelligent, high-efficiency solution. Contact us today for the best factory price and optimized results!
The 220V Wall-mounted Active Harmonic Filter (AHF) provides effective harmonic mitigation for single-phase 220V electrical systems. Using advanced DSP+CPLD digital control and a three-level topology, this compact unit delivers precise harmonic current compensation. Key features include a wide harmonic filtering range (2nd to 50th harmonic), a high filtering rate (up to 95%), and a modular design for easy installation and maintenance. The wall-mounted design saves valuable floor space. Available in various current ratings (25A to 150A), the 220V Wall-mounted AHF ensures stable and efficient operation in sensitive environments
Model description:
| GY | AHF | 0.4 | 50A | / | 4L | W |
| Enterprise code | Active Harmonic Filter |
Voltage level 0.22:220V |
Rated Capacity（kvar） 25/50/75 /100/150A |
2L:Single-phase 3L:Three-phase three-wire 4L:Three-phase four-wire |
W:Wall-mounted |
Features:
● Use DSP+CPLD all digital control core, three-level topology technology, advanced harmonic detection algorithm and PWM control strategy to achieve accurate compensation of harmonic current.
● Adopt modular design, which facilitates parallel connection of multiple modules, takes up little space and is easy to maintain.
● The structural design of independent air ducts and independent warehouses ensures the stable operation of the equipment.
● It can filter harmonics in a wide range of harmonics, from 2 to 50 harmonics, and solve the problem of three-phase unbalance at the same time.
● The harmonic filtering rate is high. If the capacity allows, the harmonic current filtering rate can be as high as 95%. Set 100% current limiting output to ensure long-term stable operation of the equipment.
Applications:
220V Wall-mounted Active Harmonic Filters are crucial for maintaining power quality in various settings:
● Small to Medium-sized Businesses: Protecting sensitive equipment and ensuring reliable operation of computers, electronics, and other critical loads.
● Residential Applications: Improving power quality in homes with high harmonic-generating appliances.
● Medical Facilities: Providing clean power for sensitive medical equipment in clinics and smaller healthcare facilities.
● Retail Environments: Ensuring the smooth operation of point-of-sale systems and other electronic devices.
● Laboratories: Protecting sensitive laboratory equipment from harmonic distortion.
220V Wall-mounted Active Harmonic Filters offer a practical and efficient solution for optimising power quality in single-phase 220V applications.
Technical Parameters:
| 220V series | 380V series | 500V series | 690V series | ||
| Altitude | < 2000m, above 2000m, derate according to GB/T3859.2 | ||||
| Ambient temperature | -20～+50℃ | ||||
| Relative humidity | ≤90%, no condensation on the surface when the monthly minimum temperature is 25℃ | ||||
| Pollution level | Level III below | ||||
| Operating Voltage | AC220V±20% | AC380V±20% | AC500V±20% | AC690V±20% | |
| Working frequency | 50Hz±5% | ||||
| Compensation current | 25A | 25/50/75/100 /150A | 100A | 100A | |
| Grid structure | L/N | 3P3W/3P4W | 3P3W/3P4W | 3P3W/3P4W | |
| Number of units connected in parallel | Ulimited | ||||
| Overall machine efficiency | ≥97% | ||||
| Grid structure | 32kHz | 16kHz | 12.8kHz | 12.8kHz | |
| Compensation range | 2～50times, single compensation rate is adjustable | ||||
| Function selection | Reactive power | Reactive power, reactive power + asymmetry | |||
| Reactive power compensation rate | ≥95% | >92% | |||
| Neutral filtering capability | Neutral line filtering capability is 3 times that of phase filtering capability | ||||
| Full response time | ＜10ms | ＜40ms | ＜40ms | ＜40ms | |
| Noise | ≤60dB | ≤60dB | ≤65dB | ≤65dB | |
| Control method | 2-way RS485 interface (supports GPRS/WIFI) | ||||
| Protection | Overload, software/hardware overcurrent, grid overvoltage and undervoltage, power failure, overtemperature, frequency abnormality protection, etc. | Overload, software/hardware overcurrent, grid overvoltage and undervoltage, grid voltage imbalance, power failure, overtemperature, frequency abnormality, short circuit protection, etc. | |||
| Installation method | Rack/wall-mounted | Rack | |||
| Incoming line | Back incoming（rack type）、 upper incoming（wall-mounted） | Back incoming line | |||
| Protection level | IP20 | ||||
Model& Specification:
| Models | ||||
|---|---|---|---|---|
| Model Number | Rated Current(A) | System voltage (V) | Dimensions (D*W*H) | Cooling method |
| GY APF-0.22-25A/2L-R/W | 25 | 220 | 220*330*160mm | Forced air cooling |
| GY APF-0.4-25A/4L-R/W | 25 | 380±20% | 460*490*89mm | |
| GY APF-0.4-50A/4L-R/W | 50 | 380±20% | 460*490*89mm | |
| GY APF-0.4-75A/4L-R/W | 75 | 380±20% | 500*510*190mm | |
| GY APF-0.4-100A/4L-R/W | 100 | 380±20% | 500*550*240mm | |
| GY APF-0.4-150A/4L-R/W | 150 | 380±20% | 500*550*240mm | |
| GY APF-0.5-100A/4L-R/W | 100 | 500±20% | 495*675*275mm | |
| GY APF-0.69-100A/4L-R/W | 100 | 690±20% | 495*675*275mm | |
Hot Tags: 220V Wall-mounted Active Harmonic Filter
Send Inquiry
Contact Info
-
Address
Wenzhou Bridge Industrial Zone, Beibaixiang Town, Yueqing City, Zhejiang Province, China
-
Tel
-
E-mail
For inquiries about active harmonic filter, static var generator, power quality or price list, please leave your email to us and we will be in touch within 24 hours.
